TouchPad: Score / Scoring

The Scoring screen is available by clicking Score on either the main menu or Enter Results screen. Make sure you have Set Point Values (#11 below) before you enter results.

TouchPad uses a dynamic scoring method. This means that scores are NOT kept after you print them; instead, they are calculated each time you request them.

Points are calculated during the processing of the results of an event. You must have specified your point values before entering the results of an event; otherwise scores will not be assigned. If you processed the results of some events before entering the point values, then call up these events again as if to enter results (do not re-enter the times). Then just click the Next or Prev button and as the results are saved, the correct points will be assigned. Then go to the Scoring screen and score.

This means that if you have a meet with 50 events, for example, each time you score, you should score from event 1 to whichever is the last event for which you processed results.

The advantage of this method is that the scores will always reflect any changes you might have made in earlier events.

The three boxes across the top of this window define the type of scoring you require.


1. Score Type

Select how to combine your scoring. You can either combine M/F, Male or Female only, or do it by Pentathlon scores.

When you select Pentathlon Scores it will disable the Score / Preview / Print button in the lower right since the other options do not apply. It will also open a section where you can enter events in the field or select from gender/age groups or gender/sub-age groups (when they exist).

TouchPad Pentathlon gender/age group drop down

Pick one and it will populate the field with the events matching your selection. You can edit the generated list if desired. Then click Score (or Cancel to disable Pentathlon Scores) and it will generate a report with the selected gender and age groups.

TouchPad Pentathlon event selection

Pentathlon meets are meets in which it is assumed that all athletes will compete in all events and their times will be added rather than their points to determine the winner in each group. Athletes who do not compete in all the events offered are NOT included in the scoring.

Pentathlon meets work well as an early season meet with all swimmers swimming each stroke plus an I.M. to get a base time in each event. Pentathlon meets may in fact have any number of events and team scoring is done in the usual way using points (including relays). The times are added for each individual and relays are not considered for time addition.

2. Team or Individual

Select to either score by team as a whole or individual athlete (i.e., individual high point).

3. Breakdown by Age Groups

If your meet is an age group meet, choose whether you want No Age Group Breakdown (i.e., the scores lumped together without recognizing the age groups) or broken down by the age groups in your meet by either Event Age Groups or User Defined Age Groups. When you select the third option you will be given a pop out box to specify what these age groups will be. Meets with multi-age events cannot use User Defined Age Groups.

For example, if you have an age group meet and you would like the individual high point winners for each age group, be sure to click Score Individuals in the second box and Use Event Age Groups or User Defined Age Groups in the third box.

When you want TEAM scores for each age group, click Score Teams in the second box and Use Event Age Groups or User Defined Age Groups in the third box.

4. Score First Heat/Last Heat Only

By selecting these options only swimmers in the first heat and/or last heat will score points toward team totals. Under Award Labels, however, you may choose to print award labels either for just first heat, last heat or all the heats involved.

5. Restricted Scoring

This refers to allowing any team only a certain number of scorers in each event, which is useful when you have large teams competing against small. None means scoring will happen as per normal. A swimmer in 1st place will receive 1st place, regardless of what team they are on, 2nd will receive 2nd, and so on.

The other three selections turn on Restricted Scoring where you then specify the number of individuals and relays from each team who may earn points. When you check Only 1st place if one team entered and only one team of two or more enters an event, that team only get points for 1st place to prevent them from dominating the other team(s).

TouchPad restricted scoring

Suppose the host limits the number of individuals per team to three, there are two teams, and only places 1-5 are scored. Furthermore, suppose the swimmers on team A score 1st-4th place and a swimmer on team B scores 5th.

  • No Move Ups - Restrictions are enforced per team; swimmers on other teams will not move up into restricted scoring places. In the above scenario the swimmers on team A will only score 1st-3rd place, the 4th place swimmer is dropped out of scoring, and the swimmer on team B scores 5th.
  • Move Up Points Only - Swimmers on other teams move up and receive the points that restricted teams would have received; places remain in finish order. In the above scenario the swimmer on team B receives the points for 4th place but stays in 5th place.
  • Move Up Points and Places - Swimmers on other teams move up and receive the points and places that restricted teams would have received. In the above scenario the swimmer on team B moves up to 4th place AND receives the points for 4th place.

6. Multiple Division Scoring

Use this function for double dual meets or if you to want have three teams score as follows 1vs2, 2vs3, and 1vs3. More generally it allows you to score subsets of the teams in your meet considering the other teams as not even present. You cannot specify this scoring pattern until you have loaded the event entry files from all teams in the meet.

7. Scoring range, even/odd, based on Seeding/Results

Enter the event range to score, whether to score only even or odd events, and whether to score based on seeding or results. If you score based on the seed times that have been entered, multiple division scoring is NOT supported in the mode, nor are individual scores. This choice will produce overall team scores based on the order of the seed times.

8. Score Using FINA Base Points

FINA Scoring (FINA is the international swimming governing body) is a way of assigning points to each athlete based on his/her time as calculated in its relationship to a base time for each event. The FINA Point Scoring Table allows comparisons of results among different events. It assigns point values to swimming performances, more points for world class performances, typically 1000 or more, and fewer points for slower performances. Each swimmer receives points based on his/her time rather than the place they earned.

Points are not available for 25M long events. FINA times are only available for meters pools, so TouchPad uses SCM times for yards pools when they exist as FINA SCM times.

There are several ways to check your FINA scores. Swimming Manawatu has a good FINA Points Calculator you can play with.

9. Scoring Report Options

Make your selection for options to appear on your report. Check Print Quality Point Team Totals to use quality points instead of regular scoring if you wish to more accurately compare large and small teams in the same meet.

10. Show How Many Team/Individuals will show on reports

You can designate ALL or select the amount of places to appear.

11. Set Point Values

This allows you to add value to the scoring ie: 10 points for 1st place, 5 for 2nd etc. Set these before you enter results. Scoring is dynamic and will score while the meet is occurring. If you set your points after the meet, you need to go to Enter Results and click Next through all events to apply scoring.

12. Clear Points

Clears all points for the event range specified in Score FROM Event __ TO __ (see #7 above), which will require cycling through those events in Enter Results if results have been entered to rescore them.

13. Score/Preview/Print

Scores can be printed to disk in HTML format ready to post on any web site.

Watch this tutorial for an overview:

__________
See Also
Tutorial - Sequence Creation for Check Ins
Score by different age groups

TouchPad

  1. TouchPad & TUSync Overview
  2. TouchPad Quick Start Guide
  3. TouchPad VIDEO Tutorials
  4. TouchPad: Step 1 - Meet Setup and Event Creation tutorial
  5. TouchPad: Step 2 - Syncing Events and Entries tutorial
  6. TouchPad: Step 3 - Athlete Entries, Meet Reports, Heat Sheets tutorial
  7. TouchPad: Step 4 - Print Award Labels and Results, Score, Export Results tutorial
  8. TouchPad: Step 5 - Sync, Release and Export Results tutorial
  9. TouchPad - Giving administrative rights to run TouchPad
  10. TouchPad shortcut keys
  11. TouchPad: Add/create a meet - Meet Setup
  12. TouchPad: Add events
  13. TouchPad: USA-S Sanctioned Event, Approved Competition and Observed Swim
  14. TouchPad: Set up meet for Not USA Registered athletes
  15. TouchPad: Alternate heats/events
  16. Adding results from TouchPad using TUSync
  17. TouchPad - Allowing Parents to Manage Checkins
  18. Athlete Check-ins using OnDeck and TouchPad
  19. Bonus events in TouchPad
  20. TouchPad - Best Practice for Meet Creation on multiple computers CRITICAL READ
  21. TouchPad: Event Records Broken report
  22. TouchPad: Check-In with OnDeck
  23. TouchPad: Create multi-age events
  24. TouchPad Creating Meet Packages - Heat Sheet/Psych Sheet/Meet Durations reports
  25. TouchPad: Add entry fees to events
  26. TouchPad: Add deck entry fees to events
  27. Deleting a TouchPad meet from SwimOffice events tab
  28. TouchPad - Restore a team
  29. Emailing invited teams for a TouchPad meet
  30. TouchPad - Enable or disable the ability to sync entries to the host
  31. TouchPad: Enable or disable sync function by team for event entries
  32. TouchPad - Event Time Standards - restrict entries for events
  33. TouchPad - Exporting a Meet Entries File
  34. TouchPad Exporting Results
  35. TouchPad: Generate meet recon file for SWIMS
  36. TouchPad - Manually adding results for a meet
  37. Why are my athletes Name/Gender coming in wrong to TouchPad?
  38. TouchPad - Generating Meet Registration Verification (USA ID Verification) for LSC or SWIMS
  39. TouchPad - Generating a meet registration file for the LSC
  40. TouchPad: Scratch an athlete's events for a session
  41. TouchPad - Team Manager(tm) Importing Meet Results
  42. TouchPad - Event type preferences
  43. TouchPad: Generate athlete check-in sheets
  44. TouchPad - Adding an event?
  45. TouchPad - Deleting an event?
  46. TouchPad - export meet results
  47. TouchPad - Export the USS Verification file?
  48. TouchPad - Generating an Event File
  49. TouchPad - sending my host an entries file for a TouchPad meet
  50. Touchpad: Accept a TouchPad invitation as a visiting team
  51. If my TouchPad meet will not sync how do I get the host my file?
  52. TouchPad: Import meet entries into TouchPad (non syncing teams)
  53. IMX/IMR points reporting using a TouchPad results file
  54. TouchPad - Inviting other TeamUnify teams to a meet using TUSync
  55. TouchPad: Meet Timeline / Meet Duration report
  56. TouchPad - Meet Results Reports
  57. TouchPad - Meet Time Estimate
  58. TouchPad - Mixed event scoring separated based on gender
  59. TouchPad - Multiple Division Scoring - allowing multiple teams to score against each other
  60. Opening sync back up to allow a team to update entries and sync to TouchPad
  61. TouchPad - Print Event Sheet
  62. TouchPad - Rejecting a team from a meet
  63. TouchPad - Restricted Scoring allows teams to score more accurately based on size/number of athletes
  64. TouchPad - Results File Export
  65. TouchPad - Score by different age groups
  66. TouchPad: Score / Scoring
  67. TouchPad - Scoring Tutorial
  68. TouchPad - Adjusting the seeding pattern for heat/lane assignments
  69. TouchPad - Seeding How To
  70. TouchPad - Sending your LSC an events file without any athlete's entered
  71. TouchPad - Sequences/Sessions and OnDeck check ins - management and best practice
  72. Set sequence adding your day and sessions and for OnDeck check ins
  73. TouchPad - Set Time Standards
  74. TouchPad - Setting up Event Messages
  75. TouchPad: Records - Add/edit Event Records
  76. TouchPad: Import/export records
  77. TouchPad: Connect your timing console
  78. Starting and ending a TouchPad meet sync time and date
  79. Syncing meet structure from Touchpad and editing on SwimOffice
  80. Syncing TouchPad/SwimOffice/OnDeck information flow
  81. TouchPad meet is not showing athlete times on SwimOffice
  82. TouchPad: How do I delete a meet?
  83. TouchPad: How do I edit an existing meets basic setup information?
  84. Tracking who has accepted their invitation and submitted entries
  85. Un-inviting a team from a TouchPad meet
  86. Updating your meet structure using TouchPad
  87. Touchpad - Delete a meet off of SwimOffice after you have accepted the invitation
  88. TouchPad - What is a sequence?
  89. Viewing who has accepted/declined a meet invitation using TUSync
  90. TouchPad: Accept visiting team's entries / Entries won't sync but are visible in SwimOffice
  91. TouchPad - Why don't my athletes qualify for open events
  92. TouchPad - Merging event times during meet
  93. TouchPad: Athlete Entries
  94. TouchPad: Relay Entries
  95. Why did a meet show up on our site that says TouchPad?
  96. TouchPad: Add an athlete during the meet
  97. TouchPad: Sync entries for meet using TUSync
  98. TouchPad: Set up a network
  99. TouchPad: Activate / view TouchPad Live results on SwimOffice
  100. TouchPad: Watch specific athletes or teams
  101. TouchPad Live - Turning on Live Results for TouchPad globally
  102. TouchPad Live - Where is my meet?
  103. TouchPad Live - hide a meet from TouchPad Live but show others
  104. TouchPad: Import a roster into TouchPad for OnDeck/manual entries
  105. TouchPad - LSC exception report requires USA ID change in TouchPad
  106. TouchPad SD3 Results File - TeamManager reports duplicate team count (visual only)
  107. Disable TouchPad starting up when you computer starts up
  108. TouchPad: Entry Manager - Import SD3 entries, rosters, meet results
  109. TouchPad: Adjust font size in Entry Manager
  110. TouchPad: Manually set or clear athlete as Not USA Registered
  111. TouchPad: Generate report of Registered and Not USA Registered athletes
  112. TouchPad: Export results for USA Registered and Not USA Registered athletes
  113. TouchPad: Sync meet results for USA Registered athletes
  114. TouchPad: Run "Timed Final/Last Heat in Finals" with finals in different session
  115. TouchPad: Show finish place by heat
  116. TouchPad: Meet Entries report
  117. TouchPad: Enter DQs and DFSs
  118. TouchPad: Delete or clear all times for an event
  119. TouchPad: Scratch athlete(s) by name or event pre-meet
  120. TouchPad: Scratch athlete(s) during meet
  121. TouchPad: Filter by open events, age, name in Scratch Pad
  122. TouchPad: View TouchPad Live results on any device
  123. TouchPad: Use FINA/USA Swimming or NCAA/Other rules for time adjustments
  124. TouchPad: Enter Results screen
  125. TouchPad: Adjust/select electronic, backup and watch times (F12)
  126. TouchPad: Failed Heat - Adjust Times
  127. TouchPad: Timer Settings - select timers
  128. TouchPad: Average Watch Times
  129. TouchPad: Award Labels
  130. TouchPad: Deck Entry report
  131. TouchPad: OVC Athletes
  132. TouchPad: Event Cut Times
  133. TouchPad: Print championship, consolation and bonus final results
  134. TouchPad: Select country and date format
  135. TouchPad: DFS (declared false start) in Enter Results
  136. TouchPad: Delete Team
  137. TouchPad: Scratches report
  138. TouchPad: Global Settings for international teams
  139. TouchPad: Report Banners
  140. TouchPad: Create/Add Report Banners - image sizes and formats
  141. TouchPad: Export Lenex Meet Results (UK)

Feedback and Knowledge Base