TouchPad: Connect your timing console

SwimOffice Admin - TouchPad PC

If you are using a USB to COM (serial) port connector you will need to know the COM number that Windows assigns to that COM port. This number may be different each time you plug into the USB port or any time you restart your computer. If the directions do not work below be sure to use your Windows help or even the Internet will have great steps to COM port discovery.

If you need to buy a USB to COM connector, TeamUnify recommends the USB Serial Adapter - Ultimate, as we have tested and verified that it works correctly.

Window XP

  1. Plug your USB-COM cable into your computer
  2. Click on My Computer
  3. Select View system information
  4. Select Hardware Tab
  5. Select Properties
  6. Select Hardware Tab
  7. Select Device Manager
  8. Open the ports by clicking the + next to Ports
  9. The USB to COM cable should show along with the COM port number that has been assigned
  10. Make a note of this number

Windows Vista

  1. Plug your USB-COM cable into your computer
  2. Right click on My Computer
  3. Select Properties
  4. Select Hardware Tab
  5. Select Device Manager
  6. Open the ports by clicking the + next to Ports
  7. The USB to COM cable should show along with the COM port number that has been assigned
  8. Make a note of this number
Windows 7
  1. Plug your USB-COM cable into your computer
  2. Select your Start in the lower left
  3. Computer on the right panel
  4. Device Manager will show on the left panel select
  5. Open the ports by clicking the + next to Ports
  6. The USB to COM cable should show along with the COM port number that has been assigned
  7. Make a note of this number

Windows 10

  1. Plug your USB-COM cable into your computer
  2. Type Device Manager in the "Search the web and Windows" bar at the bottom
  3. Click Device Manager in the list that appears
  4. Click > next to Ports
  5. The USB to COM cable should show along with the COM port number that has been assigned
  6. Make a note of this number

In TouchPad

  1. Click Enter Results. If a window does not appear where you can select your timer, click Timer Settings.
  2. Select your Type of Electronic Timer from that dropdown.
  3. Click the Timer UsingCom Port # dropdown and select the number you noted from above.
  4. See Timer Settings about other settings on this window.
  5. Click OK.

If you have Colorado/Daktronic 2000 & 6000

  1. Click Electronic Timer > Upload Events to Timer > Make your timer selection
  2. Finalize connection

TeamUnify suggests testing the connection before the meet starts.

See Also
Timer Settings - select timers


  1. TouchPad & TUSync Overview
  2. TouchPad Quick Start Guide
  3. TouchPad VIDEO Tutorials
  4. TouchPad: Step 1 - Meet Setup and Event Creation tutorial
  5. TouchPad: Step 2 - Syncing Events and Entries tutorial
  6. TouchPad: Step 3 - Athlete Entries, Meet Reports, Heat Sheets tutorial
  7. TouchPad: Step 4 - Print Award Labels and Results, Score, Export Results tutorial
  8. TouchPad: Step 5 - Sync, Release and Export Results tutorial
  9. TouchPad - Giving administrative rights to run TouchPad
  10. TouchPad shortcut keys
  11. TouchPad: Add/create a meet - Meet Setup
  12. TouchPad: Add/edit events
  13. TouchPad: USA-S Sanctioned Event, Approved Competition and Observed Swim
  14. TouchPad: Set up meet for Not USA Registered athletes
  15. TouchPad: Alternate heats/events
  16. Adding results from TouchPad using TUSync
  17. Bonus events in TouchPad
  18. TouchPad - Best Practice for Meet Creation on multiple computers CRITICAL READ
  19. TouchPad: Event Records Broken report
  20. TouchPad: Create multi-age events
  21. TouchPad Creating Meet Packages - Heat Sheet/Psych Sheet/Meet Durations reports
  22. TouchPad: Add entry fees to events
  23. TouchPad: Add deck entry fees to events
  24. Deleting a TouchPad meet from SwimOffice events tab
  25. TouchPad - Restore a team
  26. Emailing invited teams for a TouchPad meet
  27. TouchPad - Enable or disable the ability to sync entries to the host
  28. TouchPad: Enable or disable sync function by team for event entries
  29. TouchPad - Event Time Standards - restrict entries for events
  30. TouchPad - Exporting a Meet Entries File
  31. TouchPad Exporting Results
  32. TouchPad: Generate meet recon file for SWIMS
  33. TouchPad - Manually adding results for a meet
  34. Why are my athletes Name/Gender coming in wrong to TouchPad?
  35. TouchPad - Generating Meet Registration Verification (USA ID Verification) for LSC or SWIMS
  36. TouchPad - Generating a meet registration file for the LSC
  37. TouchPad: Scratch an athlete's events for a session
  38. TouchPad - Team Manager(tm) Importing Meet Results
  39. TouchPad - Event type preferences
  40. TouchPad: Generate athlete check-in sheets
  41. TouchPad - Adding an event?
  42. TouchPad - Deleting an event?
  43. TouchPad - export meet results
  44. TouchPad - Export the USS Verification file?
  45. TouchPad - Generating an Event File
  46. TouchPad - sending my host an entries file for a TouchPad meet
  47. Touchpad: Accept a TouchPad invitation as a visiting team
  48. If my TouchPad meet will not sync how do I get the host my file?
  49. TouchPad: Import meet entries into TouchPad (non syncing teams)
  50. IMX/IMR points reporting using a TouchPad results file
  51. TouchPad - Inviting other TeamUnify teams to a meet using TUSync
  52. TouchPad: Meet Timeline / Meet Duration report
  53. TouchPad - Meet Results Reports
  54. TouchPad - Meet Time Estimate
  55. TouchPad - Mixed event scoring separated based on gender
  56. TouchPad - Multiple Division Scoring - allowing multiple teams to score against each other
  57. Opening sync back up to allow a team to update entries and sync to TouchPad
  58. TouchPad - Print Event Sheet
  59. TouchPad - Rejecting a team from a meet
  60. TouchPad: Restricted Scoring - limit number of scorers in unevenly matched teams
  61. TouchPad - Results File Export
  62. TouchPad - Score by different age groups
  63. TouchPad: Score / Scoring
  64. TouchPad: Quality points / quality team scoring
  65. TouchPad - Scoring Tutorial
  66. TouchPad - Adjusting the seeding pattern for heat/lane assignments
  67. TouchPad: Seed events
  68. TouchPad - Sending your LSC an events file without any athlete's entered
  69. TouchPad: Set meet sessions - add days and sessions
  70. TouchPad - Set Time Standards
  71. TouchPad: Event messages
  72. TouchPad: Records - Add/edit Event Records
  73. TouchPad: Import/export records
  74. TouchPad: Connect your timing console
  75. Starting and ending a TouchPad meet sync time and date
  76. Syncing meet structure from Touchpad and editing on SwimOffice
  77. Syncing TouchPad/SwimOffice/OnDeck information flow
  78. TouchPad meet is not showing athlete times on SwimOffice
  79. TouchPad: How do I delete a meet?
  80. TouchPad: How do I edit an existing meets basic setup information?
  81. Tracking who has accepted their invitation and submitted entries
  82. Un-inviting a team from a TouchPad meet
  83. Updating your meet structure using TouchPad
  84. Touchpad - Delete a meet off of SwimOffice after you have accepted the invitation
  85. TouchPad - What is a sequence?
  86. Viewing who has accepted/declined a meet invitation using TUSync
  87. TouchPad: Accept visiting team's entries / Entries won't sync but are visible in SwimOffice
  88. TouchPad - Why don't my athletes qualify for open events
  89. TouchPad - Merging event times during meet
  90. TouchPad: Athlete Entries
  91. TouchPad: Relay Entries
  92. Why did a meet show up on our site that says TouchPad?
  93. TouchPad: Add an athlete during the meet
  94. TouchPad: Sync entries for meet using TUSync
  95. TouchPad: Set up a network
  96. TouchPad: Activate / view TouchPad Live results on SwimOffice
  97. TouchPad: Watch specific athletes or teams
  98. TouchPad Live - Turning on Live Results for TouchPad globally
  99. TouchPad Live - Where is my meet?
  100. TouchPad Live - hide a meet from TouchPad Live but show others
  101. TouchPad: Import a roster into TouchPad for OnDeck/manual entries
  102. TouchPad - LSC exception report requires USA ID change in TouchPad
  103. TouchPad SD3 Results File - TeamManager reports duplicate team count (visual only)
  104. Disable TouchPad starting up when you computer starts up
  105. TouchPad: Entry Manager - Import SD3 entries, rosters, meet results
  106. TouchPad: Adjust font size in Entry Manager
  107. TouchPad: Manually set or clear athlete as Not USA Registered
  108. TouchPad: Generate report of Registered and Not USA Registered athletes
  109. TouchPad: Export results for USA Registered and Not USA Registered athletes
  110. TouchPad: Sync meet results for USA Registered athletes
  111. TouchPad: Run "Timed Final/Last Heat in Finals" with finals in different session
  112. TouchPad: Show finish place by heat
  113. TouchPad: Meet Entries report
  114. TouchPad: Enter DQs and DFSs
  115. TouchPad: Delete or clear all times for an event
  116. TouchPad: Scratch athlete(s) by name or event pre-meet
  117. TouchPad: Scratch athlete(s) during meet
  118. TouchPad: Filter by open events, age, name in Scratch Pad
  119. TouchPad: View TouchPad Live results on any device
  120. TouchPad: Use FINA/USA Swimming or NCAA/Other rules for time adjustments
  121. TouchPad: Enter Results screen
  122. TouchPad: Adjust/select electronic, backup and watch times (F12)
  123. TouchPad: Failed Heat - Adjust Times
  124. TouchPad: Timer Settings - select timers
  125. TouchPad: Average Watch Times
  126. TouchPad: Award Labels
  127. TouchPad: Deck Entry report
  128. TouchPad: OVC Athletes
  129. TouchPad: Event Cut Times
  130. TouchPad: Print championship, consolation and bonus final results
  131. TouchPad: Select country and date format
  132. TouchPad: DFS (declared false start) in Enter Results
  133. TouchPad: Delete Team
  134. TouchPad: Scratches report
  135. TouchPad: Global Settings for international teams
  136. TouchPad: Report Banners
  137. TouchPad: Create/Add Report Banners - image sizes and formats
  138. TouchPad: Export Lenex Meet Results (UK)
  139. TouchPad: UK Competition Entry Check
  140. Print in TouchPad

Feedback and Knowledge Base